HYDRAULIC FITTINGS AND FITTING

The Quick Thread Coupling is suitable for all products with female thread, e.g. for pumps. With 33.3 mm (G 1") thread.

The Brass Socket is for suction- and intermediate valves. With 33.3 mm (G 1") thread, suitable for 25 mm (1") hoses.

The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) male thread.

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) female thread.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 33.3 mm (G 1") thread.

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 19 mm (3/4") hoses.

The Quick Thread Coupling is suitable for all products with female thread, e.g. for pumps. With 42 mm (G 1 1/4") thread.

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 25 mm (1") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 25 mm (1") hoses.

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 42 mm (G 1 1/4") male thread and 33.3 mm (G 1") female thread.

The Threaded Elbow Joint alters the direction, e.g. of the supply hose to a washing machine. With 26.5 mm (G 3/4") thread and 13mm (1/2") hose.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 42 mm (G 1 1/4") thread.

The 3-piece Threaded Hose Coupling consists of two hose sockets and a sleeve nut, and is therefore a flat washer seal. It serves problem-free hose extension. With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 32 mm (1 1/4") hoses.

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 47.9 mm (G 1 1/2") male thread and 42 mm (G 1 1/4") female thread.

The brass Twin Tap Connector is suitable for operating two connecting devices, for branching hoses and for connecting two hoses of various sizes, e.g. 19 mm (3/4") hoses to 13 mm (1/2") hoses. With 26.5 mm (G 3/4") thread.

The Brass Nozzle has an infinitely variable water jet which can also be completely switched off. Suitable for 13 mm (1/2") hoses.

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 32 mm (1 1/4") hoses.

The Brass Socket is for suction- and intermediate valves. With 42 mm (G 1 1/4”) thread, suitable for 32 mm (1 1/4") hoses.

The water jet of the Deluxe Brass Nozzle is infinitely variable from hard jet to fine spray, or can be completely switched off. With socket. Suitable for 13 mm (1/2") hoses.