HYDRAULIC FITTINGS AND FITTING

The water jet of the Deluxe Brass Nozzle is infinitely variable from hard jet to fine spray, or can be completely switched off. With socket. Suitable for 19 mm (3/4") hoses.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The hose can be used again. The tube can also be easily used for hose extensions. Suitable for 32 mm (1 1/4") hoses.

With a brass insertion nipple and quick coupling connection. Suitable for 6 mm GARDENA transparent hose with textile reinforcement.

With the matt chrome plated Ball Valve Tap, the full water supply can be quickly released without troublesome turning of the tap. The Ball Valve Tap has a female thread on both sides. With 21 mm (G 1/2") thread.

The Sleeve Stop Valve withstands a working pressure of up to 12 bar and is only suitable for water. It has a female thread on both sides. With 26.5 mm (G 3/4") thread.

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 26.5 mm (G 3/4") thread.

The Threaded Hose Coupling consists of a brass hose socket. An O-ring is included for sealing. With 47.9 mm (G 1 1/2") thread, suitable for 32 mm (1 1/4") hoses.

With the matt chrome plated Ball Valve Tap, the full water supply can be quickly released without troublesome turning of the tap. The Ball Valve Tap has a female thread on both sides. With 26.5 mm (G 3/4") thread.

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 33.3 mm (G 1") thread.

The matt chrome plated Tap with Threaded Hose Coupling is for indoor use. With 21 mm (G 1/2") thread, for 13 mm (1/2") hoses.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 26.5 mm (G 3/4") thread.

With a brass insertion nipple and quick coupling connection. Suitable for 9 mm GARDENA transparent hose with textile reinforcement.

The Suction and High Pressure Coupling is particularly suitable for suction- and high-pressure hoses, as it may be used in pressure lines of up to 40 bar. A safety prevents loosening of the coupling. Suitable for 19 mm (3/4") hoses

The Sleeve Stop Valve withstands a working pressure of up to 12 bar and is only suitable for water. It has a female thread on both sides. With 33.3 mm (G 1") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 33.3 mm (G 1") thread.

With the matt chrome plated Ball Valve Tap, the full water supply can be quickly released without troublesome turning of the tap. The Ball Valve Tap has a female thread on both sides. With 33.3 mm (G 1") thread.

The Suction and High Pressure Coupling is particularly suitable for suction- and high-pressure hoses, as it may be used in pressure lines of up to 40 bar. A safety prevents loosening of the coupling. Suitable for 25 mm (1") hoses.

The Brass Quick Coupling Nozzle is equipped with a quick coupling connection, suitable for all hose sizes. The water jet is infinitely variable or can be completely shut off. Suitable for 13 mm (1/2") hoses.

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 42 mm (G 1 1/4") thread.

The Suction and High Pressure Coupling is particularly suitable for suction- and high-pressure hoses, as it may be used in pressure lines of up to 40 bar. A safety prevents loosening of the coupling. Suitable for 32 mm (1 1/4") hoses.