HYDRAULIC FITTINGS AND FITTING

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 10 to 16 mm (1/2").

The one-piece Threaded Hose Coupling is suitable for products with female threads, e.g. for the GARDENA Brass Twin Tap Connector 19mm (3/4") (Art. No. 7155). With 26.5 mm (G 3/4") thread, suitable for 13 mm (1/2") hoses.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 12 to 20 mm (1/2").

The one-piece Threaded Hose Coupling is suitable for products with female threads, e.g. for the GARDENA Brass Twin Tap Connector 19mm (3/4") (Art. No. 7155). With 26.5 mm (G 3/4") thread, suitable for 19 mm (3/4") hoses.

The solid brass Hose Repairer serves easy and fast hose repairs: first the damaged section of the hose is cut out, then the Hose Repairer is inserted. The hose can be used again. The tube can also be easily used for hose extensions. Suitable for 13 mm (1/2") hoses.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 20 to 32 mm (3/4").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 25 to 40 mm (1").

The tape seals all threads without a rubber seal or O-ring. The Thread Tape is 12 m long, 12 mm wide and 0.1 mm thick.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 5 mm. They are supplied in bundles of 2 pieces each. Suitable for a clamping range of 7 to 11 mm.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The tube can also be easily used for hose extensions. Suitable for 19 mm (3/4") hoses.

The one-piece Threaded Hose Coupling is suitable for products with female threads, e.g. for the GARDENA Brass Twin Tap Connector 19mm (3/4") (Art. No. 7155). With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 32 to 50 mm (1 1/4").

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2") female thread.

The Spare Washer is suitable for all GARDENA Brass Quick Thread Couplings

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 40 to 60 mm (1 1/2").

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The tube can also be easily used for hose extensions. Suitable for 25 mm (1") hoses.

The Brass Socket is for suction- and intermediate valves. With 26.5 mm (G 3/4") thread, suitable for 19 mm (3/4") hoses.

The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 26.5 mm (G 3/4") thread, suitable for 13 mm (1/2") hoses.

The Strainer is part of the intermediate valve which prevents backflow of the pumping media, e.g. when the pump is switched off. It consists of fine-mesh stainless steel. With 26.5 mm (G 3/4") thread.

The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 26.5 mm (G 3/4") thread.