HYDRAULIC FITTINGS AND FITTING

The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 33.3 mm (G 1") thread, suitable for 25 mm (1") hoses.

The 3-piece Threaded Hose Coupling consists of two hose sockets and a sleeve nut, and is therefore a flat washer seal. It serves problem-free hose extensions. With 26.5 mm (G 3/4") thread, suitable for 13 mm (1/2") hoses.

The 3-piece Threaded Hose Coupling consists of two hose sockets and a sleeve nut, and is therefore a flat washer seal. It serves problem-free hose extension. With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.

The brass Twin Tap Connector is suitable for operating two connecting devices, for branching hoses and for connecting two hoses of various sizes, e.g. 19 mm (3/4") hoses to 13 mm (1/2") hoses. With 26.5 mm (G 3/4") thread.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 10 to 16 mm (1/2").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 12 to 20 mm (1/2").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 20 to 32 mm (3/4").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 25 to 40 mm (1").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 32 to 50 mm (1 1/4").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 40 to 60 mm (1 1/2").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 5 mm. They are supplied in bundles of 2 pieces each. Suitable for a clamping range of 7 to 11 mm.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 70 to 90 mm (3").

The solid brass Hose Repairer serves easy and fast hose repairs: first the damaged section of the hose is cut out, then the Hose Repairer is inserted. The hose can be used again. The tube can also be easily used for hose extensions. Suitable for 13 mm (1/2") hoses.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The tube can also be easily used for hose extensions. Suitable for 19 mm (3/4") hoses.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The tube can also be easily used for hose extensions. Suitable for 25 mm (1") hoses.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The hose can be used again. The tube can also be easily used for hose extensions. Suitable for 32 mm (1 1/4") hoses.

The tape seals all threads without a rubber seal or O-ring. The Thread Tape is 12 m long, 12 mm wide and 0.1 mm thick.

The Quick 3-way Coupling is suitable for branching hoses and connecting two hoses with various sizes, e.g. 19 mm (3/4") hoses to 13 mm (1/2") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 13 mm (1/2") and 16 mm (5/8") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 19 mm (3/4") hoses.