HYDRAULIC FITTINGS AND FITTING

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 19 mm (3/4") hoses.

The Brass Socket is for suction- and intermediate valves. With 33.3 mm (G 1") thread, suitable for 25 mm (1") hoses.

The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) male thread.

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) female thread.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 33.3 mm (G 1") thread.

The Quick Thread Coupling is suitable for all products with female thread, e.g. for pumps. With 33.3 mm (G 1") thread.

The Flat Washers serve to seal threaded couplings with female threads. The package contains five pieces with a diameter of 1/2".

The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 33.3 mm (G 1") thread.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 26.5 mm (G 3/4") thread.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 19 mm (3/4") hoses.

The Cap Hose Coupling serves to close the GARDENA Quick 3-way Coupling (Art. No. 7119).

The Strainer is part of the intermediate valve which prevents backflow of the pumping media, e.g. when the pump is switched off. It consists of fine-mesh stainless steel. With 42 mm (G 1 1/4") thread.

The Quick Thread Coupling with male thread is suitable for all products with female thread, e.g. for pumps. With 26.5 mm (G 3/4") thread.

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 33.3 mm (G 1) female thread.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 21 mm (G 1/2") thread.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 70 to 90 mm (3").

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4") female thread.

The Quick Thread Coupling with male thread is suitable for all products with female thread, e.g. for pumps. With 21 mm (G 1/2") thread.

The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 33.3 mm (G 1") thread, suitable for 25 mm (1") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 13 mm (1/2") and 16 mm (5/8") hoses.