HYDRAULIC FITTINGS AND FITTING

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 12 to 20 mm (1/2").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 10 to 16 mm (1/2").

The brass Twin Tap Connector is suitable for operating two connecting devices, for branching hoses and for connecting two hoses of various sizes, e.g. 19 mm (3/4") hoses to 13 mm (1/2") hoses. With 26.5 mm (G 3/4") thread.

The 3-piece Threaded Hose Coupling consists of two hose sockets and a sleeve nut, and is therefore a flat washer seal. It serves problem-free hose extension. With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.

The 3-piece Threaded Hose Coupling consists of two hose sockets and a sleeve nut, and is therefore a flat washer seal. It serves problem-free hose extensions. With 26.5 mm (G 3/4") thread, suitable for 13 mm (1/2") hoses.

The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 33.3 mm (G 1") thread, suitable for 25 mm (1") hoses.

The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.

The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 33.3 mm (G 1") thread, suitable for 13 mm (1/2") hoses.

The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 26.5 mm (G 3/4") thread, suitable for 19 mm (3/4") hoses.

The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 26.5 mm (G 3/4") thread, suitable for 13 mm (1/2") hoses.

The Threaded Hose Coupling consists of a brass hose socket. An O-ring is included for sealing. With 47.9 mm (G 1 1/2") thread, suitable for 32 mm (1 1/4") hoses.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 21 mm (G 1/2") thread.

The water jet of the Deluxe Brass Nozzle is infinitely variable from hard jet to fine spray, or can be completely switched off. With socket. Suitable for 19 mm (3/4") hoses.

The water jet of the Deluxe Brass Nozzle is infinitely variable from hard jet to fine spray, or can be completely switched off. With socket. Suitable for 13 mm (1/2") hoses.

The Cap Hose Coupling serves to close the GARDENA Quick 3-way Coupling (Art. No. 7119).

The Brass Quick Coupling Nozzle is equipped with a quick coupling connection, suitable for all hose sizes. The water jet is infinitely variable or can be completely shut off. Suitable for 25 mm (1") hoses.

The Brass Quick Coupling Nozzle is equipped with a quick coupling connection, suitable for all hose sizes. The water jet is infinitely variable or can be completely shut off. Suitable for 19 mm (3/4") hoses.

The Brass Quick Coupling Nozzle is equipped with a quick coupling connection, suitable for all hose sizes. The water jet is infinitely variable or can be completely shut off. Suitable for 13 mm (1/2") hoses.

The Flat Washers serve to seal threaded couplings with female threads. The package contains five pieces with a diameter of 1/2".

With a brass insertion nipple and quick coupling connection. Suitable for 9 mm GARDENA transparent hose with textile reinforcement.