HYDRAULIC FITTINGS AND FITTING

The one-piece Threaded Hose Coupling is suitable for products with female threads, e.g. for the GARDENA Brass Twin Tap Connector 19mm (3/4") (Art. No. 7155). With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.

The one-piece Threaded Hose Coupling is suitable for products with female threads, e.g. for the GARDENA Brass Twin Tap Connector 19mm (3/4") (Art. No. 7155). With 26.5 mm (G 3/4") thread, suitable for 19 mm (3/4") hoses.

The one-piece Threaded Hose Coupling is suitable for products with female threads, e.g. for the GARDENA Brass Twin Tap Connector 19mm (3/4") (Art. No. 7155). With 26.5 mm (G 3/4") thread, suitable for 13 mm (1/2") hoses.

The Threaded Elbow Joint alters the direction, e.g. of the supply hose to a washing machine. With 26.5 mm (G 3/4") thread and 13mm (1/2") hose.

The matt chrome plated Tap with Threaded Hose Coupling is for indoor use. With 26.5 mm (G 3/4") thread, for 19 mm (3/4") hoses.

The matt chrome plated Tap with Threaded Hose Coupling is for indoor use. With 21 mm (G 1/2") thread, for 13 mm (1/2") hoses.

The Suction and High Pressure Coupling is particularly suitable for suction- and high-pressure hoses, as it may be used in pressure lines of up to 40 bar. A safety prevents loosening of the coupling. Suitable for 32 mm (1 1/4") hoses.

The Suction and High Pressure Coupling is particularly suitable for suction- and high-pressure hoses, as it may be used in pressure lines of up to 40 bar. A safety prevents loosening of the coupling. Suitable for 25 mm (1") hoses.

The Suction and High Pressure Coupling is particularly suitable for suction- and high-pressure hoses, as it may be used in pressure lines of up to 40 bar. A safety prevents loosening of the coupling. Suitable for 19 mm (3/4") hoses

The Strainer is part of the intermediate valve which prevents backflow of the pumping media, e.g. when the pump is switched off. It consists of fine-mesh stainless steel. With 42 mm (G 1 1/4") thread.

The Strainer is part of the intermediate valve which prevents backflow of the pumping media, e.g. when the pump is switched off. It consists of fine-mesh stainless steel. With 33.3 mm (G 1") thread.

The Strainer is part of the intermediate valve which prevents backflow of the pumping media, e.g. when the pump is switched off. It consists of fine-mesh stainless steel. With 26.5 mm (G 3/4") thread.

The Brass Nozzle has an infinitely variable water jet which can also be completely switched off. Suitable for 13 mm (1/2") hoses.

The Spare Washer is suitable for all GARDENA Brass Quick Thread Couplings

The Sleeve Stop Valve withstands a working pressure of up to 12 bar and is only suitable for water. It has a female thread on both sides. With 42 mm (G 1 1/4") thread.

The Sleeve Stop Valve withstands a working pressure of up to 12 bar and is only suitable for water. It has a female thread on both sides. With 33.3 mm (G 1") thread.

The Sleeve Stop Valve withstands a working pressure of up to 12 bar and is only suitable for water. It has a female thread on both sides. With 26.5 mm (G 3/4") thread.

The Quick Thread Coupling is suitable for all products with female thread, e.g. for pumps. With 42 mm (G 1 1/4") thread.

The Quick Thread Coupling is suitable for all products with female thread, e.g. for pumps. With 33.3 mm (G 1") thread.

The Quick Thread Coupling with male thread is suitable for all products with female thread, e.g. for pumps. With 26.5 mm (G 3/4") thread.