HYDRAULIC FITTINGS AND FITTING

With a brass insertion nipple and quick coupling connection. Suitable for 6 mm GARDENA transparent hose with textile reinforcement.

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 32 mm (1 1/4") hoses.

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 25 mm (1") hoses.

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 19 mm (3/4") hoses.

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) female thread.

The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) male thread.

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 33.3 mm (G 1) female thread.

The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2) male thread.

The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 26.5 mm (G 3/4") thread.

The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 33.3 mm (G 1") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 42 mm (G 1 1/4") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 33.3 mm (G 1") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 26.5 mm (G 3/4") thread.

The Brass Socket is for suction- and intermediate valves. With 42 mm (G 1 1/4”) thread, suitable for 32 mm (1 1/4") hoses.

The Brass Socket is for suction- and intermediate valves. With 33.3 mm (G 1") thread, suitable for 25 mm (1") hoses.

The Brass Socket is for suction- and intermediate valves. With 26.5 mm (G 3/4") thread, suitable for 19 mm (3/4") hoses.

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 47.9 mm (G 1 1/2") male thread and 42 mm (G 1 1/4") female thread.

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 42 mm (G 1 1/4") male thread and 33.3 mm (G 1") female thread.

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4") female thread.

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2") female thread.