Categories
Vendor
Rating
Price
-
from
to
GARDENA Threaded Hose Coupling, 3-piece 26,5 mm (G 3/4") / 13 mm (1/2")
The 3-piece Threaded Hose Coupling consists of two hose sockets and a sleeve nut, and is therefore a flat washer seal. It serves problem-free hose extensions. With 26.5 mm (G 3/4") thread, suitable for 13 mm (1/2") hoses.
Brass Threaded Nipple, reduced 26,5 mm (G 3/4") / 21 mm G (1/2")
The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2) male thread.
Strainer 33,3 mm (G 1")
The Strainer is part of the intermediate valve which prevents backflow of the pumping media, e.g. when the pump is switched off. It consists of fine-mesh stainless steel. With 33.3 mm (G 1") thread.
GARDENA Threaded Hose Coupling, 2-piece 33,3 mm (G 1") / 19 mm (3/4")
The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.
Brass Threaded Nipple 26,5 mm (G 3/4")
The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 26.5 mm (G 3/4") thread.
GARDENA Threaded Hose Coupling, 2-piece 33,3 mm (G 1") / 13 mm (1/2")
The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 33.3 mm (G 1") thread, suitable for 13 mm (1/2") hoses.
GARDENA Threaded Hose Coupling, 2-piece 26,5 mm (G 3/4") / 19 mm (3/4")
The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 26.5 mm (G 3/4") thread, suitable for 19 mm (3/4") hoses.
Strainer 26,5 mm (G 3/4")
The Strainer is part of the intermediate valve which prevents backflow of the pumping media, e.g. when the pump is switched off. It consists of fine-mesh stainless steel. With 26.5 mm (G 3/4") thread.
Brass Sockets 26,5 mm (G 3/4") / 19 mm (3/4")
The Brass Socket is for suction- and intermediate valves. With 26.5 mm (G 3/4") thread, suitable for 19 mm (3/4") hoses.
GARDENA Threaded Hose Coupling, 2-piece 26,5 mm (G 3/4") / 13 mm (1/2")
The two-piece Threaded Hose Coupling comprises a socket and sleeve nut; it is therefore a flat washer seal. It is suitable as a connection to the tap, however not for pumps. With 26.5 mm (G 3/4") thread, suitable for 13 mm (1/2") hoses.
Hose Repairer 25 mm (1")
The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The tube can also be easily used for hose extensions. Suitable for 25 mm (1") hoses.
Hose Clamps 40 - 60 mm (1 1/2")
The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 40 to 60 mm (1 1/2").
Brass Reducing Coupling 26,5 mm (G 3/4") / 21 mm G (1/2")
The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2") female thread.
Spare Washer
The Spare Washer is suitable for all GARDENA Brass Quick Thread Couplings
Hose Clamps 32 - 50 mm (1 1/4")
The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 32 to 50 mm (1 1/4").
Threaded Hose Coupling, 1-piece 33,3 mm (G 1") / 19 mm (3/4")
The one-piece Threaded Hose Coupling is suitable for products with female threads, e.g. for the GARDENA Brass Twin Tap Connector 19mm (3/4") (Art. No. 7155). With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.
Hose Repairer 19 mm (1/2")
The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The tube can also be easily used for hose extensions. Suitable for 19 mm (3/4") hoses.
Hose Clamps 25 - 40 mm (1")
The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 25 to 40 mm (1").
PTFE sealing tape
The tape seals all threads without a rubber seal or O-ring. The Thread Tape is 12 m long, 12 mm wide and 0.1 mm thick.
Hose Clamps 7 - 11 mm
The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 5 mm. They are supplied in bundles of 2 pieces each. Suitable for a clamping range of 7 to 11 mm.
Phone : 0048 500 00 33 64