Categories
- SPRINKLER SYSTEMS GARDENA (214)
- WATER CONTROLS (9)
- POP-UP SPRINKLERS GARDENA (13)
- PIPES AND CONNECTORS (27)
- DRIP IRRIGATION (113)
- WATER PIPELINES (16)
- SPRINKLER HOSES (4)
- SPRINKLERS (13)
- GARDEN HOSE SPRAYERS (22)
- GARDEN HOSES (13)
- GARDEN HOSE REELS (2)
- WATER PUMPS (26)
- PRESSURE PUMPS/PRESSURE TANK UNITS (1)
- FITTING, TAP CONNECTOR, QUICK (45)
Vendor
Price
- €1.31 - €50.00 (214)
-
from
to
Pop-up Sprinkler S 50
For small lawns up to 50 m²
Sprinkler POP UP MD180
For watering smaller lawn areas. Water flow on/off control. Integral dirt filter. Connection: 1/2" female thread.
4-Way Coupling 13 mm (1/2") 2 szt.
4-Way Coupling 4.6 mm (3/16") 10 szt.
6-Pattern Spray Nozzle, 2 szt.
Above Ground Drip Irrigation Line 13 mm (1/2")
Above Ground Drip Irrigation Line 4.6 mm (3/16") 15m
Adjustable Endline Drip Head, 10 szt
Adjustable Endline Drip Head, pressure equalizing 5 szt.
Adjustable Inline Drip Head 10 szt.
Adjustable Inline Drip Head, pressure equalizing 5szt.
Brass Intermediate Valves 26,5 mm (G 3/4")
The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 26.5 mm (G 3/4") thread.
Brass Intermediate Valves 33,3 mm (G 1")
The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 33.3 mm (G 1") thread.
Brass Intermediate Valves 42 mm (G 1 1/4")
The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 42 mm (G 1 1/4") thread.
Brass Suction Valves 26,5 mm (G 3/4")
The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 26.5 mm (G 3/4") thread.
Brass Suction Valves 33,3 mm (G 1")
The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 33.3 mm (G 1") thread.
Brass Suction Valves 42 mm (G 1 1/4")
The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 42 mm (G 1 1/4") thread.
Brass Threaded Nipple (1'')
The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 33.3 mm (G 1") thread.
Brass Threaded Nipple 26,5 mm (G 3/4")
The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 26.5 mm (G 3/4") thread.
Brass Threaded Nipple, reduced 26,5 mm (G 3/4") / 21 mm G (1/2")
The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2) male thread.
Phone : 0048 500 00 33 64