Categories
- SPRINKLER SYSTEMS GARDENA (214)
- WATER CONTROLS (9)
- POP-UP SPRINKLERS GARDENA (13)
- PIPES AND CONNECTORS (27)
- DRIP IRRIGATION (113)
- WATER PIPELINES (16)
- SPRINKLER HOSES (4)
- SPRINKLERS (13)
- GARDEN HOSE SPRAYERS (22)
- GARDEN HOSES (13)
- GARDEN HOSE REELS (2)
- WATER PUMPS (26)
- PRESSURE PUMPS/PRESSURE TANK UNITS (1)
- FITTING, TAP CONNECTOR, QUICK (45)
Vendor
Price
- €1.31 - €50.00 (214)
-
from
to
Suction Filter with Backflow Preventer 19 mm (3/4")/25 mm (1")
Especially robust metal-plastic production. Simply connect the Suction Filter to the Suction Hose sold by the metre (Art. No. 1720-22/1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement. For Suction Hoses with a diameter of 19 mm (3/4") or 25 mm (1").
Adapter Piece
T-piece 25 mm x 3/4" female thread
T-piece 25 mm x 3/4" male thread
Connector 25 mm
Pump Fitting G 1"/1"
With this fitting, Garden Pumps, Electronic Pressure Pumps, Pressure Tank Units and Submersible Pressure Pumps with female thread can be easily connected to the GARDENA hose connection system. Mating thread: 33.3 mm (G 1)/33.3 mm (G 1).
Connector 25 mm x 1" female thread
Connector 25 mm x 1" male thread
Suction Hose 3.5 m
With this ready-to-connect, vacuum-resistant reinforced spiral hose, the Suction Unit can be extended by 3.5 m. The hose can also be used in connection with suction filters. The hose has a length of 3.5 m, a diameter of 25 mm (1") and a male thread of 33.3 mm (G 1).
Connector 25 mm x 3/4" female thread
Bore Hole Suction Hose
Ideal for vacuum-resistant connection of a pump to a borehole or pipework. The hose has a length of 0.5 m, a diameter of 25 mm (1") and a female thread of 3.3 mm (G 1) at both ends.
Reducing Connector 32 mm
Drain Valve
Pump Connection Set for 13 mm (1/2") hoses
For the connection of 13 mm (1/2") hoses to pumps with 33.3 mm (G 1) male thread. The Connection Set includes 1 x Tap Connector Art. No. 902 and 1 x Standard Hose Connector, Art. No. 915.
Pump Connection Set for 19 mm (3/4") hoses
For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.
Connecting Pipe 25 mm
Classic Spray Sprinkler
The GARDENA Classic Spray Sprinkler is available in a set with the GARDENA Standard Hose Connector (Art. No. 915). This set is the price-favourable alternative for the irrigation of smaller areas. The Spray Sprinkler has a range of spray of maximum 10 m. It is therefore suitable for areas of maximum 80 m². The Spray Sprinkler is securely mounted on a spike. With this, you can easily and securely position the GARDENA Classic Spray Sprinkler in the lawn or ground. You can also easily remove it again and relocate it. With its fine mist spray, it irrigates fragile plants very gently. For easy, soft irrigation.
For Watertimer, Water Computers and Pressure Tank Units.
For Watertimer, Water Computers and Pressure Tank Units.
Garden Shower
Gardena Shop recommends to the garden on a hot day, a cold shower on a hot day! The possibility of stepless adjustment, and closing the water flow. The pin can be easily selected on the lawn or garden umbrella rack. Convenient to use thanks to the continuous height adjustment.
GARDENA Threaded Hose Connector 26,5 mm (G 3/4")
The GARDENA Threaded Hose Connector is used for adapting a Threaded Hose Coupling to the GARDENA Tap Connector. This is the case e.g. with a washing machine.
Phone : 0048 500 00 33 64