HYDRAULIC FITTINGS AND FITTING

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 26.5 mm (G 3/4") thread.

The Sleeve Stop Valve withstands a working pressure of up to 12 bar and is only suitable for water. It has a female thread on both sides. With 26.5 mm (G 3/4") thread.

With the matt chrome plated Ball Valve Tap, the full water supply can be quickly released without troublesome turning of the tap. The Ball Valve Tap has a female thread on both sides. With 21 mm (G 1/2") thread.

With a brass insertion nipple and quick coupling connection. Suitable for 6 mm GARDENA transparent hose with textile reinforcement.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The hose can be used again. The tube can also be easily used for hose extensions. Suitable for 32 mm (1 1/4") hoses.

The water jet of the Deluxe Brass Nozzle is infinitely variable from hard jet to fine spray, or can be completely switched off. With socket. Suitable for 19 mm (3/4") hoses.

The water jet of the Deluxe Brass Nozzle is infinitely variable from hard jet to fine spray, or can be completely switched off. With socket. Suitable for 13 mm (1/2") hoses.

The Brass Socket is for suction- and intermediate valves. With 42 mm (G 1 1/4”) thread, suitable for 32 mm (1 1/4") hoses.

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 32 mm (1 1/4") hoses.

The Brass Nozzle has an infinitely variable water jet which can also be completely switched off. Suitable for 13 mm (1/2") hoses.

The brass Twin Tap Connector is suitable for operating two connecting devices, for branching hoses and for connecting two hoses of various sizes, e.g. 19 mm (3/4") hoses to 13 mm (1/2") hoses. With 26.5 mm (G 3/4") thread.

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 47.9 mm (G 1 1/2") male thread and 42 mm (G 1 1/4") female thread.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 32 mm (1 1/4") hoses.

The 3-piece Threaded Hose Coupling consists of two hose sockets and a sleeve nut, and is therefore a flat washer seal. It serves problem-free hose extension. With 33.3 mm (G 1") thread, suitable for 19 mm (3/4") hoses.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 42 mm (G 1 1/4") thread.

The Threaded Elbow Joint alters the direction, e.g. of the supply hose to a washing machine. With 26.5 mm (G 3/4") thread and 13mm (1/2") hose.

The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 25 mm (1") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 25 mm (1") hoses.

The Brass Reducing Coupling has a male- and female thread. It serves to connect, e.g. a pipe to a quick coupling. With 42 mm (G 1 1/4") male thread and 33.3 mm (G 1") female thread.

The Quick Thread Coupling is suitable for all products with female thread, e.g. for pumps. With 42 mm (G 1 1/4") thread.