HYDRAULIC FITTINGS AND FITTING

The Quick Thread Coupling with male thread is suitable for all products with female thread, e.g. for pumps. With 21 mm (G 1/2") thread.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 42 mm (G 1 1/4") thread.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 33.3 mm (G 1") thread.

The Quick Thread Coupling with female thread is suitable for all products with a male thread and is used as a connector for, e.g., the water tap. With 26.5 mm (G 3/4") thread.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 32 mm (1 1/4") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 25 mm (1") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 19 mm (3/4") hoses.

The Quick Coupling Hose Connector is a robust hose connection for either end of the hose. Through the high-quality brass material, it is ideal for use in agriculture, industry and trades. Suitable for 13 mm (1/2") and 16 mm (5/8") hoses.

The Quick 3-way Coupling is suitable for branching hoses and connecting two hoses with various sizes, e.g. 19 mm (3/4") hoses to 13 mm (1/2") hoses.

The tape seals all threads without a rubber seal or O-ring. The Thread Tape is 12 m long, 12 mm wide and 0.1 mm thick.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The hose can be used again. The tube can also be easily used for hose extensions. Suitable for 32 mm (1 1/4") hoses.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The tube can also be easily used for hose extensions. Suitable for 25 mm (1") hoses.

The solid brass Hose Repairer serves easy and fast hose repairs: just cut out the damaged hose section and insert the Hose Repairer – the hose can be used again. The tube can also be easily used for hose extensions. Suitable for 19 mm (3/4") hoses.

The solid brass Hose Repairer serves easy and fast hose repairs: first the damaged section of the hose is cut out, then the Hose Repairer is inserted. The hose can be used again. The tube can also be easily used for hose extensions. Suitable for 13 mm (1/2") hoses.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 70 to 90 mm (3").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 5 mm. They are supplied in bundles of 2 pieces each. Suitable for a clamping range of 7 to 11 mm.

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 40 to 60 mm (1 1/2").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 32 to 50 mm (1 1/4").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 25 to 40 mm (1").

The worm-drive Hose Clamps, DIN 3017, are made of steel and bright galvanised, hexagonal with head slit. They secure a hose to a connection or a connector. The width of the Hose Clamps is 9 mm. Suitable for a clamping range of 20 to 32 mm (3/4").