WATER PUMPS

Ideal for vacuum-resistant connection of a pump to a borehole or pipework. The hose has a length of 0.5 m, a diameter of 25 mm (1") and a female thread of 3.3 mm (G 1) at both ends.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 42 mm (G 1 1/4") thread.

Especially robust metal-plastic production. Simply connect the Suction Filter to the Suction Hose sold by the metre (Art. No. 1720-22/1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement. For Suction Hoses with a diameter of 19 mm (3/4") or 25 mm (1").

Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The filter can be washed. The Preliminary Filter has a 33.3 mm (G 1) mating thread and is suited for a water flow of up to 3,000 l/h.

With this ready-to-connect, vacuum-resistant reinforced spiral hose, the Suction Unit can be extended by 3.5 m. The hose can also be used in connection with suction filters. The hose has a length of 3.5 m, a diameter of 25 mm (1") and a male thread of 33.3 mm (G 1).

Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The filter can be washed. The Preliminary Filter has a 33.3 mm (G 1) mating thread and is suited for a water flow of up to 6,000 l/h.

Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose has a length of 3.5 m, a diameter of 25 mm (1") and is suitable for pumps with 33.3 mm (G 1) male thread.

Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose has a length of 7 m, a diameter of 25 mm (1") and is suitable for pumps with 33.3 mm (G 1) male thread.

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 19 mm (3/4") and is supplied without connectors and fittings.

Simply cut the vacuum-resistant spiral suction hose from the roll in the desired length. The hose has a diameter of 25 mm (1") and is supplied without connectors and fittings.