WATER PUMPS

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) female thread.

The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) male thread.

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 33.3 mm (G 1) female thread.

The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2) male thread.

The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 26.5 mm (G 3/4") thread.

The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 33.3 mm (G 1") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 42 mm (G 1 1/4") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 33.3 mm (G 1") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 26.5 mm (G 3/4") thread.

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 42 mm (G 1 1/4") thread.

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 33.3 mm (G 1") thread.

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 26.5 mm (G 3/4") thread.

Ideal for vacuum-resistant connection of a pump to a borehole or pipework. The hose has a length of 0.5 m, a diameter of 25 mm (1") and a female thread of 3.3 mm (G 1) at both ends.