SPRINKLER SYSTEMS GARDENA

For watering smaller lawn areas. Water flow on/off control. Integral dirt filter. Connection: 1/2" female thread.

Simply connect the Suction Filter to the 25 mm (1") Suction Hose sold by the metre (Art. No.1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement.

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 42 mm (G 1 1/4") thread.

The GARDENA Sprinkler Hose Connection Set includes all Original GARDENA System Fittings required for connection to the GARDENA Sprinkler Hose – at the hose inlet and outlet ends. The fittings can be easily assembled.

Ideal for vacuum-resistant connection of a pump to a borehole or pipework. The hose has a length of 0.5 m, a diameter of 25 mm (1") and a female thread of 3.3 mm (G 1) at both ends.

With the GARDENA Adapter For Indoor Taps, it is possible to connect the GARDENA System to an indoor tap, e.g. in the kitchen or the bathroom. Regardless whether the tap has a male or a female thread, the Adaptor will always fit. Thanks to the Adapter, the Original GARDENA System can be especially quickly attached and detached. For this, only the shower head of the tap must be replaced. This is facilitated by the supplied installation tool. The Adapter prevents scratching of the fittings and is suitable for taps with M 22 x 1 female- and M 24 x 1 male thread.

The matt chrome plated Tap with Threaded Hose Coupling is for indoor use. With 26.5 mm (G 3/4") thread, for 19 mm (3/4") hoses.

The Brass Quick Coupling Nozzle is equipped with a quick coupling connection, suitable for all hose sizes. The water jet is infinitely variable or can be completely shut off. Suitable for 19 mm (3/4") hoses.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 42 mm (G 1 1/4") thread.