SPRINKLER SYSTEMS GARDENA

The GARDENA Classic Spray Sprinkler is available in a set with the GARDENA Standard Hose Connector (Art. No. 915). This set is the price-favourable alternative for the irrigation of smaller areas. The Spray Sprinkler has a range of spray of maximum 10 m. It is therefore suitable for areas of maximum 80 m². The Spray Sprinkler is securely mounted on a spike. With this, you can easily and securely position the GARDENA Classic Spray Sprinkler in the lawn or ground. You can also easily remove it again and relocate it. With its fine mist spray, it irrigates fragile plants very gently. For easy, soft irrigation.

The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 26.5 mm (G 3/4") thread.

With the GARDENA Water Sprayer, you have the basic equipment for watering. With its soft spray, the sprayer is ideal for watering potted plants and individual areas. Soft plastic components allow a good grip.

The GARDENA Hose Connector allows a change of connecting devices, in particular when water pressure is high. The Hose Connector with Control Valve is secured at the hose outlet. Here you can conveniently adjust and switch off the water flow, e.g. in order to change connecting devices. This saves you a trip to the tap to adjust or switch off the water flow. It is suitable for13 mm (1/2") hoses.

For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.

The high-quality GARDENA Premium Hose Connector features a modern and sophisticated design, and allows a quick, convenient connection to the hose outlet. Through simple pulling, the connection can be released. Thanks to the grooved soft plastic grip, the GARDENA Premium Hose Connector lies well and securely in the hand. The Hose Connector is protected by a rubber ring that prevents damage. Thanks to the sturdy clamping nut made of high-quality metal, the product holds hoses firmly for greater safety. The Hose Connector is suitable for13 mm (1/2") hoses.

The GARDENA Hose Connector allows a change of connecting devices, in particular when water pressure is high. The Hose Connector with Control Valve is secured at the hose outlet. Here you can conveniently adjust and switch off and the water flow, e.g. in order to change connecting devices. This saves you a trip to the tap to adjust or switch off the water flow. It is suitable for 19 mm (3/4") and 16 mm (5/8") hoses.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 26.5 mm (G 3/4") thread.