WATER PUMPS

The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1721-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 25 mm (1") and has a female thread with 33.3 mm (G 1).

The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1720-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 19 mm (3/4") and has a female thread with 33.3 mm (G 1).

With this ready-to-connect, vacuum-resistant reinforced spiral hose, the Suction Unit can be extended by 3.5 m. The hose can also be used in connection with suction filters. The hose has a length of 3.5 m, a diameter of 25 mm (1") and a male thread of 33.3 mm (G 1).

Simply connect the Suction Filter to the 25 mm (1") Suction Hose sold by the metre (Art. No.1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement.

Especially robust metal-plastic production. Simply connect the Suction Filter to the Suction Hose sold by the metre (Art. No. 1720-22/1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement. For Suction Hoses with a diameter of 19 mm (3/4") or 25 mm (1").

Simply connect the Suction Filter to the 19 mm (3/4") Suction Hose sold by the metre (Art. No. 1720-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement.

With this fitting, Submersible Pumps with female threads can be easily connected to the GARDENA hose connection system. Mating thread: 33.3 mm (G1) /33.3 mm (G 1).

Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The filter can be washed. The Preliminary Filter has a 33.3 mm (G 1) mating thread and is suited for a water flow of up to 3,000 l/h.

With this fitting, Garden Pumps, Electronic Pressure Pumps, Pressure Tank Units and Submersible Pressure Pumps with female thread can be easily connected to the GARDENA hose connection system. Mating thread: 33.3 mm (G 1)/33.3 mm (G 1).

For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.

For the connection of 13 mm (1/2") hoses to pumps with 33.3 mm (G 1) male thread. The Connection Set includes 1 x Tap Connector Art. No. 902 and 1 x Standard Hose Connector, Art. No. 915.

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) female thread.

The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) male thread.

The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 33.3 mm (G 1) female thread.

The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2) male thread.

The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 26.5 mm (G 3/4") thread.

The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 33.3 mm (G 1") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 42 mm (G 1 1/4") thread.

The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 33.3 mm (G 1") thread.