SPRINKLER SYSTEMS GARDENA

The water jet of the Deluxe Brass Nozzle is infinitely variable from hard jet to fine spray, or can be completely switched off. With socket. Suitable for 13 mm (1/2") hoses.

With the GARDENA Classic Multi Sprayer you are best-equipped: the sprayer has three different water spray patterns: soft spray, bubble jet spray, 9 point hard jet. With soft nozzles – easy to clean. A wide selection for watering of individual areas (soft spray), potted plants (bubble jet) and effective cleaning (9 point hard jet)

The GARDENA Bubble-Jet Threaded Adapter is perfectly suited for connecting the GARDENA System to a tap with aerator head, e.g. in the kitchen and bathroom. The Threaded Adapter is suitable for taps with M 22 x 1 male thread. On the outlet side, it has a 26.5 mm (G 3/4") thread. This is suitable for the GARDENA Threaded Tap Connector with the Art. No. 901-50.

The GARDENA Bubble-Jet Adapter can be attached to the GARDENA Threaded Tap Connector. It delivers a gentle, splash-free and aerated flow.

The Brass Quick Coupling Nozzle is equipped with a quick coupling connection, suitable for all hose sizes. The water jet is infinitely variable or can be completely shut off. Suitable for 25 mm (1") hoses.

The Brass Quick Coupling Nozzle is equipped with a quick coupling connection, suitable for all hose sizes. The water jet is infinitely variable or can be completely shut off. Suitable for 19 mm (3/4") hoses.

The Brass Quick Coupling Nozzle is equipped with a quick coupling connection, suitable for all hose sizes. The water jet is infinitely variable or can be completely shut off. Suitable for 13 mm (1/2") hoses.

With the GARDENA Angled Tap Connector, the GARDENA System connection of a hose to the tap is possible. The connector can be rotated and swivelled. This prevents kinking and twisting of the hose at the tap. The water can always flow unobstructed and the hose is not damaged. It is also ideally suited for use on the Hose Trolley. The Tap Connector is suited for taps with 33.3 mm (G 1") and 26.5 mm (G 3/4") thread.

For changing from 33.3 mm (G 1) female thread to 26.5 mm (G 3/4) male thread.

With the GARDENA Adapter For Indoor Taps, it is possible to connect the GARDENA System to an indoor tap, e.g. in the kitchen or the bathroom. Regardless whether the tap has a male or a female thread, the Adaptor will always fit. Thanks to the Adapter, the Original GARDENA System can be especially quickly attached and detached. For this, only the shower head of the tap must be replaced. This is facilitated by the supplied installation tool. The Adapter prevents scratching of the fittings and is suitable for taps with M 22 x 1 female- and M 24 x 1 male thread.

Your nozzle or sprayer has a female thread and does not fit the hose connector? No problem, that's what the GARDENA Accessory Adapter is for. It is simply screwed on and fits all parts in the Original GARDENA System. The Accessory Adapter has an American thread. For every problem there is a solution.

Your nozzle or sprayer has a female thread and does not fit the tap? No problem, that's what the GARDENA Accessory Adapter is for. It is simply screwed on and fits all parts in the Original GARDENA System. The Accessory Adapter has a 26.5 mm (G 3/4") thread. For every problem, there is a solution.

Who doesn't know this problem: your garden only has one water source but you would like to connect two devices to the garden hose at the same time? With the use of GARDENA 3-way Y-Coupling, hoses can be conveniently branched. This allows simultaneous work in the garden, e.g. the lawn can be sprinkled while the hose is used for watering flower beds. The Y-Coupling is suitable for adapting 19 mm (3/4") to 13 mm (1/2") hoses. For every problem there is a solution.

Gardena Shop recommends to the garden on a hot day, a cold shower on a hot day! The possibility of stepless adjustment, and closing the water flow. The pin can be easily selected on the lawn or garden umbrella rack. Convenient to use thanks to the continuous height adjustment.