Optimise your watering systems with the right pump.
No matter what you want to use the pump for – GARDENA offers powerful pumps for different areas. For irrigation of your garden use one of the garden or submersible pressure pumps. They can easily deliver water from wells, natural springs or rainwater tanks. If you want to supply water for domestic use, one of the GARDENA Pressure Tank Units or Electronic Pressure Pumps is the ideal partner. For draining of flooded cellars or for pumping water from or between containers, submersible pumps can be of help, especially if dirty water needs to be pumped.
More information and advice on which pump fits your individual need is available in our pump guide.
Suction Unit 7 m
Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose has a length of 7 m, a diameter of 25 mm (1") and is suitable for pumps with 33.3 mm (G 1) male thread.
Suction Unit 3.5 m
Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose has a length of 3.5 m, a diameter of 25 mm (1") and is suitable for pumps with 33.3 mm (G 1) male thread.
Suction Hose Fitting 25 mm (1")
The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1721-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 25 mm (1") and has a female thread with 33.3 mm (G 1).
Suction Hose Fitting 19 mm (3/4")
The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1720-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 19 mm (3/4") and has a female thread with 33.3 mm (G 1).
Suction Hose 3.5 m
With this ready-to-connect, vacuum-resistant reinforced spiral hose, the Suction Unit can be extended by 3.5 m. The hose can also be used in connection with suction filters. The hose has a length of 3.5 m, a diameter of 25 mm (1") and a male thread of 33.3 mm (G 1).
Suction Filter with Backflow Preventer 25 mm (1")
Simply connect the Suction Filter to the 25 mm (1") Suction Hose sold by the metre (Art. No.1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement.
Suction Filter with Backflow Preventer 19 mm (3/4")/25 mm (1")
Especially robust metal-plastic production. Simply connect the Suction Filter to the Suction Hose sold by the metre (Art. No. 1720-22/1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement. For Suction Hoses with a diameter of 19 mm (3/4") or 25 mm (1").
Suction Filter with Backflow Preventer 19 mm (3/4")
Simply connect the Suction Filter to the 19 mm (3/4") Suction Hose sold by the metre (Art. No. 1720-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement.
Submersible Pump Fitting 33.3 mm (G1) + 33.3 mm (G1)
With this fitting, Submersible Pumps with female threads can be easily connected to the GARDENA hose connection system. Mating thread: 33.3 mm (G1) /33.3 mm (G 1).
Pump Preliminary Filter 6,000 l/h
Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The filter can be washed. The Preliminary Filter has a 33.3 mm (G 1) mating thread and is suited for a water flow of up to 6,000 l/h.
Pump Preliminary Filter 3,000 l/h
Simply mount the Preliminary Filter between the Garden Pump, Pressure Tank Unit or Electronic Pressure Pump and the Suction Hose. It effectively protects against impurities and is especially recommended for the pumping of media that contain sand. The filter can be washed. The Preliminary Filter has a 33.3 mm (G 1) mating thread and is suited for a water flow of up to 3,000 l/h.
Pump Fitting G 1"/1"
With this fitting, Garden Pumps, Electronic Pressure Pumps, Pressure Tank Units and Submersible Pressure Pumps with female thread can be easily connected to the GARDENA hose connection system. Mating thread: 33.3 mm (G 1)/33.3 mm (G 1).
Pump Connection Set for 19 mm (3/4") hoses
For the connection of 19 mm (3/4") hoses to pumps with 33.3 mm (G 1) male thread. The "Profi" system fittings are ideal for increased water flow. The Connection Set includes 1 x Tap Connector, Art. No. 2802 and 1 x Hose Connector, Art. No. 2817.
Pump Connection Set for 13 mm (1/2") hoses
For the connection of 13 mm (1/2") hoses to pumps with 33.3 mm (G 1) male thread. The Connection Set includes 1 x Tap Connector Art. No. 902 and 1 x Standard Hose Connector, Art. No. 915.
Electric Drill Pump
Brass Threaded Nipple, reduced 33,3 mm (G 1") / 26,5 mm (G 3/4")
The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) female thread.
Brass Threaded Nipple, reduced 33,3 mm (G 1") / 26,5 mm (G 3/4")
The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) male thread.
Brass Threaded Nipple, reduced 26,5 mm (G 3/4") / 33,3 mm (G 1")
The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 33.3 mm (G 1) female thread.
Brass Threaded Nipple, reduced 26,5 mm (G 3/4") / 21 mm G (1/2")
The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2) male thread.
Brass Threaded Nipple 26,5 mm (G 3/4")
The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 26.5 mm (G 3/4") thread.
Phone : 0048 500 00 33 64