Categories
- WATER CONTROLS (19)
- POP-UP SPRINKLERS GARDENA (13)
- PIPES AND CONNECTORS (28)
- DRIP IRRIGATION (132)
- WATER PIPELINES (18)
- SPRINKLER HOSES (6)
- SPRINKLERS (15)
- GARDEN HOSE SPRAYERS (23)
- GARDEN HOSES (16)
- GARDEN HOSE REELS (21)
- WATER PUMPS (34)
- PRESSURE PUMPS/PRESSURE TANK UNITS (6)
- FITTING, TAP CONNECTOR, QUICK (45)
Vendor
Suction Unit 3.5 m
Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose has a length of 3.5 m, a diameter of 25 mm (1") and is suitable for pumps with 33.3 mm (G 1) male thread.
Suction Unit 7 m
Complete, ready for connection, vacuum-resistant reinforced spiral hose for direct connection to the pump. With suction filter to protect the pump against damage through impurities, and with backflow preventer for a shorter re-suction time. The hose has a length of 7 m, a diameter of 25 mm (1") and is suitable for pumps with 33.3 mm (G 1) male thread.
“Profi” Maxi-Flow System Threaded Tap Connector 1"
The GARDENA "Profi" Maxi-Flow System Threaded Tap Connector is ideal in connection with longer hoses or for use with pumps. It creates the connection between the hose connected by a hose connector and the tap. It is simply screwed onto the tap. The "Profi" Maxi-Flow System Threaded Tap Connector is suited for a tap with 33.3 mm (G 1”) thread. It is also suitable for all GARDENA pumps (except Art. No. 1490-20).
L-piece 25 mm x 3/4" male thread
“Profi” Maxi-Flow System Threaded Tap Connector
The GARDENA "Profi" Maxi-Flow System Threaded Tap Connector is ideal in connection with longer hoses or for use with pumps. It creates the connection between the hose connected by a hose connector and the tap. The "Profi" Maxi-Flow System Threaded Tap Connector is simply screwed onto the tap. It fits a tap with 26.5 mm (G 3/4") thread.
Angle Piece 25 mm x 1/2" male thread
“Profi” Maxi-Flow System Universal Adapter 26,5 mm (G 3/4")
The GARDENA "Profi" Maxi-Flow System Universal Adapter is ideal in connection with longer hoses or for use with pumps. Irrigation devices with a female thread can be connected to the "Profi" Maxi-Flow System. Equipped with a 26.5 mm (G 3/4“) thread.
Angle Piece 25 mm x 3/4" female thread
“Profi” Maxi-Flow System T-Coupling
The GARDENA "Profi" Maxi-Flow System T-Coupling is ideal in connection with longer hoses or for use with pumps. It converts from "Profi" Maxi-Flow System to the Original GARDENA System. The GARDENA "Profi" Maxi-Flow System T-Coupling is equipped with a "Profi" Maxi-Flow System inlet, a "Profi" Maxi-Flow System outlet and an Original GARDENA System outlet. Both GARDENA systems can thereby be joined and used together.
Angle Piece 25 mm x 3/4" male thread
“Profi” Maxi-Flow System 3-way Coupling
The GARDENA "Profi" Maxi-Flow System 3-way Reducing Coupling is ideal in connection with longer hoses or for use with pumps. With the Coupling, a hose can be easily branched into two further hoses. This allows simultaneous, various work in the garden, e.g. the lawn can be sprinkled while the other hose is used for watering flower-beds. Special about this 3-way Reducing Coupling is the "Profi" Maxi-Flow System inlet and the two Original GARDENA System outlets. The two GARDENA systems can thereby be easily combined and used together.
“Profi” Maxi-Flow System 3-way Y-Coupling
The GARDENA "Profi" Maxi-Flow System 3-way Y-Coupling is ideal in connection with longer hoses or for use with pumps. Who doesn't know this problem: your garden has only one water source, but you would like to connect two devices to the garden hose at the same time? Particularly in the "Profi" Maxi-Flow System a practical solution. With the use of the GARDENA "Profi" Maxi-Flow System 3-way Y-Coupling, the hose can be practically branched. This allows simultaneous, various work in the garden, e.g. the lawn can be sprinkled while the other hose is used for watering flower-beds. The 3-way Y-Coupling has a 3/4" inlet and two 3/4" outlets. For every problem, there is a solution.
Suction Filter with Backflow Preventer 25 mm (1")
Simply connect the Suction Filter to the 25 mm (1") Suction Hose sold by the metre (Art. No.1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement.
T-piece 25 mm
“Profi” Maxi-Flow System Hose Connector 19 mm (3/4")
The GARDENA "Profi" Maxi-Flow System Hose Connector is ideal in connection with longer hoses or for use with pumps. It allows a fast connection for the hose outlet of 19 mm (3/4") hoses. This connection is just as easily released again: through simple pulling, the connection is released. The special connector ensures tight fitting.
Suction Filter with Backflow Preventer 19 mm (3/4")
Simply connect the Suction Filter to the 19 mm (3/4") Suction Hose sold by the metre (Art. No. 1720-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement.
T-piece 25 mm x 1/2" male thread
“Profi” Maxi-Flow System Hose Connector with Control Valve
The GARDENA "Profi" Maxi-Flow System Hose Connector with Control Valve is ideal in connection with longer hoses or for use with pumps. It allows a change of the connecting devices, in particular with high water pressure. The Hose Connector with Control Valve is secured at the end of the hose. Here, you can conveniently regulate and shut off the water flow, e.g. in order to change connecting devices. This saves a trip to the tap in order to adjust the water flow or shut it off. The GARDENA "Profi" Maxi-Flow System Hose Connector with Control Valve is suitable for 19 mm (3/4") hoses. Through the special connector, the Hose Connector with Control Valve ensures tight fitting.
Suction Filter with Backflow Preventer 19 mm (3/4")/25 mm (1")
Especially robust metal-plastic production. Simply connect the Suction Filter to the Suction Hose sold by the metre (Art. No. 1720-22/1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement. For Suction Hoses with a diameter of 19 mm (3/4") or 25 mm (1").
Adapter Piece
Phone : 0048 500 00 33 64