Categories
- SPRINKLER SYSTEMS GARDENA (214)
- WATER CONTROLS (9)
- POP-UP SPRINKLERS GARDENA (13)
- PIPES AND CONNECTORS (27)
- DRIP IRRIGATION (113)
- WATER PIPELINES (16)
- SPRINKLER HOSES (4)
- SPRINKLERS (13)
- GARDEN HOSE SPRAYERS (22)
- GARDEN HOSES (13)
- GARDEN HOSE REELS (2)
- WATER PUMPS (26)
- PRESSURE PUMPS/PRESSURE TANK UNITS (1)
- FITTING, TAP CONNECTOR, QUICK (45)
Vendor
Price
- €1.31 - €50.00 (214)
-
from
to
Twin-Tap Connector 33,3 mm (G 1")
The GARDENA Twin-Tap Connector serves the operation of two accessories. In this manner, two hoses never need to be changed at the tap. The two outlets are fully adjustable, independently of each other. The GARDENA Twin-Tap Connector is suitable for taps with 33.3 mm (G 1") thread.
Turbo-driven Pop-up Sprinkler T 380
Turbo-driven Pop-up Sprinkler T 200
Turbo-driven Pop-up Sprinkler T 100
Tap with Threaded Hose Coupling 26,5 mm (G 3/4") / 19 mm (3/4")
The matt chrome plated Tap with Threaded Hose Coupling is for indoor use. With 26.5 mm (G 3/4") thread, for 19 mm (3/4") hoses.
Tap with Threaded Hose Coupling 21 mm (G 1/2") / 13 mm (1/2")
The matt chrome plated Tap with Threaded Hose Coupling is for indoor use. With 21 mm (G 1/2") thread, for 13 mm (1/2") hoses.
T-piece 25 mm x 3/4" male thread
T-piece 25 mm x 3/4" female thread
T-piece 25 mm x 1/2" male thread
T-piece 25 mm
T-Joint for Spray Nozzles 4,6 mm (3/16") 5 szt.
T-Joint 4.6 mm (3/16") 10 szt.
T-Joint 13 mm (1/2") 2 szt.
System Stowaway
Supply Pipe 4.6 mm (3/16") 50m
Supply Pipe 4.6 mm (3/16") 15m
Suction Hose Fitting 25 mm (1")
The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1721-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 25 mm (1") and has a female thread with 33.3 mm (G 1).
Suction Hose Fitting 19 mm (3/4")
The fitting allows vacuum-resistant connection of the Suction Hose sold by the metre (Art. No. 1720-22) to a pump. Complete with hose clamp for easy securement. The fitting has a diameter of 19 mm (3/4") and has a female thread with 33.3 mm (G 1).
Suction Hose 3.5 m
With this ready-to-connect, vacuum-resistant reinforced spiral hose, the Suction Unit can be extended by 3.5 m. The hose can also be used in connection with suction filters. The hose has a length of 3.5 m, a diameter of 25 mm (1") and a male thread of 33.3 mm (G 1).
Suction Filter with Backflow Preventer 25 mm (1")
Simply connect the Suction Filter to the 25 mm (1") Suction Hose sold by the metre (Art. No.1721-22). It protects against impurities and thereby damage to the pump. The backflow preventer shortens the re-suction time and thereby allows more efficient pumping. Complete with hose clamp for easy securement.
Phone : 0048 500 00 33 64