Categories
- SPRINKLER SYSTEMS GARDENA (255)
- WATER CONTROLS (19)
- POP-UP SPRINKLERS GARDENA (13)
- PIPES AND CONNECTORS (28)
- DRIP IRRIGATION (130)
- WATER PIPELINES (18)
- SPRINKLER HOSES (4)
- SPRINKLERS (14)
- GARDEN HOSE SPRAYERS (23)
- GARDEN HOSES (14)
- GARDEN HOSE REELS (18)
- WATER PUMPS (29)
- PRESSURE PUMPS/PRESSURE TANK UNITS (1)
- FITTING, TAP CONNECTOR, QUICK (45)
Vendor
Price
- €2.11 - €150.00 (255)
-
from
to
Classic Wall-Fixed Hose Reel 60
Classic Spray Sprinkler
The GARDENA Classic Spray Sprinkler is available in a set with the GARDENA Standard Hose Connector (Art. No. 915). This set is the price-favourable alternative for the irrigation of smaller areas. The Spray Sprinkler has a range of spray of maximum 10 m. It is therefore suitable for areas of maximum 80 m². The Spray Sprinkler is securely mounted on a spike. With this, you can easily and securely position the GARDENA Classic Spray Sprinkler in the lawn or ground. You can also easily remove it again and relocate it. With its fine mist spray, it irrigates fragile plants very gently. For easy, soft irrigation.
Classic Rose Sprinkler Foxtrot
Classic roll-fix Flat Hose in a Cassette
Classic Irrigation Control System 6030
Classic Irrigation Control System 4030
Classic Hose Reel 10 Set
Classic Hose Box 15 Set
Classic Hanging Basket Spray Lance
Classic Circular Sprinkler Samba
Classic Adjustable Spray Nozzle
The GARDENA Cleaning Nozzle is the classic spray nozzle model. Whether for cleaning or watering, you can choose any water jet strength from hard jet to fine mist.
Classic Adjustable Spray Gun Nozzle with Flow Control
Classic 6 Pattern Sprinkler Boogie
Clamp Shells 32 mm (1 1/4")
The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 32 mm (1 1/4") hoses.
Clamp Shells 25 mm (1")
The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 25 mm (1") hoses.
Clamp Shells 19 mm (3/4")
The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 19 mm (3/4") hoses.
Central Filter
Brass Threaded Nipple, reduced 33,3 mm (G 1") / 26,5 mm (G 3/4")
The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) female thread.
Brass Threaded Nipple, reduced 33,3 mm (G 1") / 26,5 mm (G 3/4")
The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) male thread.
Brass Threaded Nipple, reduced 26,5 mm (G 3/4") / 33,3 mm (G 1")
The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 33.3 mm (G 1) female thread.
Phone : 0048 500 00 33 64