Categories
- SPRINKLER SYSTEMS GARDENA (272)
- WATER CONTROLS (19)
- POP-UP SPRINKLERS GARDENA (13)
- PIPES AND CONNECTORS (28)
- DRIP IRRIGATION (132)
- WATER PIPELINES (18)
- SPRINKLER HOSES (6)
- SPRINKLERS (15)
- GARDEN HOSE SPRAYERS (23)
- GARDEN HOSES (16)
- GARDEN HOSE REELS (21)
- WATER PUMPS (34)
- PRESSURE PUMPS/PRESSURE TANK UNITS (6)
- FITTING, TAP CONNECTOR, QUICK (45)
Vendor
Below and Above Ground Drip Irrigation Line 13.7 mm
Brass Intermediate Valves 26,5 mm (G 3/4")
The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 26.5 mm (G 3/4") thread.
Brass Intermediate Valves 33,3 mm (G 1")
The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 33.3 mm (G 1") thread.
Brass Intermediate Valves 42 mm (G 1 1/4")
The intermediate valve prevents backflow of the pumping media, e.g. when a pump is switched off. The housing is made of solid brass. With 42 mm (G 1 1/4") thread.
Brass Suction Valves 26,5 mm (G 3/4")
The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 26.5 mm (G 3/4") thread.
Brass Suction Valves 33,3 mm (G 1")
The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 33.3 mm (G 1") thread.
Brass Suction Valves 42 mm (G 1 1/4")
The Brass Suction Valve consists of a strainer, valve ball and gasket. The valve body is made of brass, the strainer of fine-mesh stainless steel braiding. The valve can be used both vertically and horizontally. With 42 mm (G 1 1/4") thread.
Brass Threaded Nipple (1'')
The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 33.3 mm (G 1") thread.
Brass Threaded Nipple 26,5 mm (G 3/4")
The Brass Threaded Nipple has pipe thread on both sides. For use, e.g., with pumps. With 26.5 mm (G 3/4") thread.
Brass Threaded Nipple, reduced 26,5 mm (G 3/4") / 21 mm G (1/2")
The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 21 mm (G 1/2) male thread.
Brass Threaded Nipple, reduced 26,5 mm (G 3/4") / 33,3 mm (G 1")
The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 26.5 mm (G 3/4") male thread and 33.3 mm (G 1) female thread.
Brass Threaded Nipple, reduced 33,3 mm (G 1") / 26,5 mm (G 3/4")
The Brass Threaded Nipple, reduced has pipe thread on both sides. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) male thread.
Brass Threaded Nipple, reduced 33,3 mm (G 1") / 26,5 mm (G 3/4")
The Brass Threaded Nipple, reduced has both a male thread and a female thread. It is used to reduce the thread, e.g. with pumps. With 33.3 mm (G 1") male thread and 26.5 mm (G 3/4) female thread.
Central Filter
Clamp Shells 19 mm (3/4")
The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 19 mm (3/4") hoses.
Clamp Shells 25 mm (1")
The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 25 mm (1") hoses.
Clamp Shells 32 mm (1 1/4")
The Clamp Shells are made of hot-pressed brass and serve the secure attachment of suction or high-pressure hoses. With galvanised hexagonal head bolts and nuts. Suitable for 32 mm (1 1/4") hoses.
Connecting Pipe 13 mm (1/2") 15 m
Connecting Pipe 13 mm (1/2") 50m
Connector 13 mm (1/2") 3szt.
Phone : 0048 500 00 33 64